From Trash to Treasure Tutorial: Double-Duty Sewing Desk and Craft Station

My neighbor had this out his driveway the day before trash day & I put a note on it explaining that I'd like to refinish it if he was going to throw it away. He called me, drove it over, & actually delivered it to my garage. Now that's service! Originally, it was going to be a vanity for my bedroom, but during the refinishing process, I decided it may not be appropriate for my bedroom, but I still needed a sewing desk.

 so it was still a valuable piece for me to refinish. 

It had a thick laminate on it that was even peel up in some places. I went about scraping & sanding, but this was before I bought my finishing sander & had to use the belt sander for the large areas. This was the project I was doing when

I realized I needed something a little more lightweight...

The scraping all had to be done by hand & the laminate was REALLY glued on tight in a lot of places, which resulted in lots of little cuts, bruises, & other wounds.

I started priming & that was when I noticed I'd really have to go to work on the 

one side that's flipped up in the air because some of the wood 

was stripped off in chunks when the laminate was removed. 

I used wood filler to smooth out the splintered area & sanded it by hand.

Here are the pictures of the finished side after much patience with the filler & sandpaper.

It took a few days because the filler would have to dry, then I'd sand & have to 

use more filler because it was uneven, until it was suitable for priming.

Finally, it was primed. 

While it was drying in the garage after two coats of white, semi-gloss paint, 

I went upstairs to what was our guest room & removed the shutter-type, folding 

closet doors. They came off their track easily, & the plan is that if we ever want to 

put them back on, I'll just have my husband or a handyman pop them back in. 

For right now, I stored them in the giant walk-in closet in the room where 

my son sleeps because while he uses the bedroom part of that room 

(for his crib & a changing table/dresser that he doesn't even use anymore 

because he's 2-years-old now), all of his stuff is in the other 

bedroom (his big boy room!) & closet .

I found beautiful, brand-new curtains at a thrift store that is near a Target & receives 

a lot of new merchandise that they don't put on their shelves (only because the 

packaging may have been damaged) to hang over the closet frame. 

Then I can open the curtains when I'm using the area as my crafting & sewing station, 

& close them when guests are over so it looks like a beautiful part of our decor! 

(I need my husband's help to hang the curtains... in other words, who knows when that will get done! :( I might just attempt to tackle it myself, but I know that's a bad idea & that's why I'm still being patient.)

This also solved the problem of my different supplies being all over the house in different places: paints in the dining room, sewing supplies in the guest room, fabric in a linen closet, cotton filler & batting under a bed, & on & on... I'm still organizing this area, but at least all of the large components are in place now so I can get started & find everything it's place.

I want to decoupage some fabric on the drawer-fronts when I find the time (a 2-year-old decides when I have time), but I  needed the space to be functional NOW! So until then,

here's the finished desk!

Here's the desk & the area around it, inside the closet. Again, this area is FAR from 

organized right now, but at least I have a place to start. When the curtains are hung, 

all of it will tuck neatly inside & no one will know what's behind them!

I set up my sewing machine & have decided to use the small center drawer & 

top two drawers on each side for sewing stuff so it's easily within reach. 

I'm also in the middle of attaching cork-board to the wall above the desk 

for displaying fabric swatches, inspirational ideas, pictures & 

things that make me happy, etc.

Here's a close-up of the new hardware I installed on the drawers. 

I went with a fun, flirty, girly look by finding some 

glass knobs at the Home Depot.

Here are some other areas of the same room as of now, 

which also serves as the guest room when people visit.

I set up this table so I had extra space to iron, cut fabric, etc. 

The basket is where I organized my knitting supplies!

As soon as I finish the whole room I'll make a post with pictures 

to illustrate storage/organization techniques for a craft center. 

"It was more than discovering something that I loved to do - 

It was discovering someone I had always been." 

 ~ Natalie ;-*

From Trash to Treasure Tutorial: Mid-Century Modern Bedside Tables with Drawers

I found these tables at a thrift store & they were so solid & had great bones, so I picked them up for less than $5 a piece & brought them home to bring back to life!

I sanded them because I thought I was going to stain them, but during the process I changed my mind (as so often happens) because I thought they would be nice as a baby blue for now, & later I could decoupage some pretty paper on the top & drawer fronts. Still, look at how beautiful the wood is! I can always strip the paint & stain if I change my mind AGAIN. 

My husband was letting me use a belt sander of his, but it was overkill for the jobs 

I was doing; so I bought a Makita Finishing Sander & it's my new buddy! 

I call it Buzzby, or Buzz for short, haha...

Even though I still have more plans for these, here they are right now. 

I didn't switch out the hardware because I liked the old ones.

Here are some close-ups of where, after I painted, I went back in with some sand paper 

& scuffed the edges  a little to give them a weathered, antique look. 

As soon as I have the time, I'm going to decoupage the top & drawer-fronts 

with fabric. If you're wondering why I have to wait to finish things, 

please read the post "About Me!" Thanks!

"It was more than discovering something that I loved to do - 

It was discovering someone I had always been." 

 ~ Natalie ;-*

From Trash to Treasure Tutorial: Cast-off Wall Cabinet Becomes Faux Apothecary Conversation Piece

 BEFORE                          &                            AFTER: 

                                      

.................................................................................................

This cabinet was such a silly thing to find. I almost didn't even accept it 

from a neighbor, who was going to throw it out, when they offered it to me. 

It ended up becoming my biggest (& longest!) project yet; 

& the project of which I'm the most proud! 

Remember when I said, "bear with me as I venture out & try new things," 

because with every project I complete I learn a little more? 

Well, get ready to BEAR! 

I learned a lot more than I had bargained for with this project; 

but it was totally worth it all in the end. 

Now I feel like I can take on anything, & that's a good feeling to have.

Here we go!

10/4/2011

I got this cabinet for free & at first was going to use it as a storage cabinet 

in the garage for my refinishing tools, hardware, & painting supplies.

Then we received an Ethan Allen mailer with this server in it.:

Ethan Allen Townhouse Howell Server

Instantly, I was reminded of the cabinet in the garage; so I went about refinishing it to see if I could replicate the beautiful Ethan Allen version.

12/1/2011

I removed the hardware, doors, & shelves & went about priming it 
with some Rust-oleum spray paint.

Next I picked the paint, which I already had from an accent wall in a bedroom. 

It took about 3 layers of paint to get it how I wanted. 

I used a Martha Stewart roller I got at Home Depot. 

These rollers make a really smooth paint finish that goes on fast & easy. 

The clean-up is the best part because they are SO much easier 

(& faster!) to clean than traditional ones!

I realized while I was painting, in order to protect my floors 

(& so it looked like it's own piece & not like a cabinet fell off the wall & lying on the floor), 

that it would need some furniture legs. 

I went back to the Ethan Allen picture for reference & the next time I was at Home Depot I grabbed some legs & mounting plates. 

I've never attached legs to furniture before, but there's a first time for everything, right?

 

It got really cold before I could do any more. 
It's too big to bring inside & too cold in the garage to paint. See you in the Spring!


Sometime in January 2012


CHANGE OF PLANS!
Only, now here's the problem, people... I found this:

 A homemade version of 

Pottery Barn's Andover Cabinet in white at

Ana White's website:

Thank GOD that Winter came & I had to take some time off or 

I would have wasted so much time making the Ethan Allen cabinet!

Here is the real one at Pottery Barn's website:

And here are the pictures at Ana's site of how to do it:

Ummmm.... is it just me or do I already have the cabinet to do this?! 

I have always wanted an apothecary cabinet, & here's the other thing... 

I actually think it will be easier than my original plans! I will still attach the feet 

because I think they will make it look like a more stand-alone piece. 

I have my work cut out for me no matter what; but I like this cabinet a lot more! 

All of a sudden, this project got a whole lot easier & WAY better looking! Well, I'll keep you posted. I've been knocking out projects left & right lately. I need to get to posting them ASAP! I'll start making the plans now & get to work as soon as the weather allows.

3/30/12

I went to Jo-Ann's & got a few of these thin plywood craft boards.

They were 1/4" thick, 6" wide, & 36" long.

Of course, I knew the dimensions of the cabinet before I bought the wood. After lots & lots & lots & LOTS of math, I knew that the drawers would have to be 

6" long & 7"wide, which is why I went with the 6" wide boards. 

Less cutting on my part would ensure more uniformity. 

 I started measuring in 7" at a time 

(& double-checking & measuring again) & cutting. 

Remember the old saying, 

"MEASURE TWICE -- CUT ONCE."

My husband's circular saw I used to tackle the job:

 

Cutting!

After I was done cutting it was time to start gluing the "drawers" on to the cabinet. 

My tools for the job:

I started measuring & gluing.

After they were done & needed to dry, 

I laid them side-by-side to make sure that they were even.

They were!

I set them aside until the next day.

3/31/12

They don't have to look completely sealed shut because they are, 

after all, supposed to be drawers; 

BUT I filled in any large cracks that may have popped up with wood-filler.

That needed to dry before sanding it down.

My time was up & so they had to sit & wait for what would come tomorrow in the morning.

(Oh, did I forget to mention that I already repainted the cabinet with 

Rust-Oleum's Ivory Silk Satin Finish spray-paint? Well, I did... 

I also spray-painted the feet with Rust-Oleum's Oil-Rubbed Bronze.)

4/1/12

It's MORNING! 

(Happy Birthday, Teddy Bear! I miss you!)

4/1/02-1/26/11

It's time to sand...

prime...

& paint!

4/2/12

After it was dry, I drilled the pilot holes 

(I'll insert the size I used here) & attached the knobs.

*******************

Here's a little tip about the knobs:

They're the cheapest wooden knobs that 

Home Depot sells, at $0.94 per knob! 

With a little Oil-Rubbed Bronze spray-paint, they look like the expensive 

$3 & up per knob that they charge for that finish! TA-DA!)

*******************

4/5/12

I started the next door.

While I was doing that, I looked at the cabinet...

I had to put some wood filler in the scratches that I just couldn't get to go AWAY!

Then, that wood pallet I didn't know what to do with yet came to mind & I got out the saw & began taking it apart.

& apart...

Then I measured the wood & tried to think of a way 

to make it into a reclaimed wood top for the cabinet. 

I decided if I stained it a dark color , it might look really cool 

with the oil-rubbed bronze finish on the knobs & feet.

4/6/12

I cut the boards & this was my first lay-out.

I started sanding,

 

did some rearranging,

put the doors in front of it to get an idea of how it would all come together,

& sanded some more!

Finally, I decided this top will make it look more finished. 

(The wood for the top is cut in these pictures & laid out, 

but not in the final positions & not nailed or glued down.)

Oh yeah! I almost forgot... You'll notice that the feet are attached in these pictures. 

In the beginning of this post, I showed the pictures of the "Heavy Duty Top Plates" I attached. I picked those up at Home Depot along with the feet, which conveniently already had the screw-tops attached that fit right into the top plates.

Then it was Easter weekend, so that meant traveling & break time.

4/11/12

I got the top glued down in place, using the same mix of construction adhesive 

& wood glue I used to attach the faux drawer-fronts; 

except I ran out of the first bottle of wood glue after gluing all that craft wood to the cabinet doors & bought a bottle of Gorilla Glue brand wood glue to do the top.

I also ended up having to add four small chunks of wood, 

one strategically placed in each row, in order to create the overhang on the sides.

Some more of the tools used on this job:

I didn't use any of that wood filler from the kit. I just used the little silver tool; 

but I'm sure the rest  of the kit will come in handy some time.

Next, I used STAINABLE wood-filler to fill in all of the cracks.

Now it was time for more sanding with 60-grit first...

My husband suggested checking to make sure it was level, too. Good idea, honey!

80-grit...

100-grit...

120-grit...

200-grit...

4/12/12

Before it's final sanding, it needed to be extra secure; 

so I go out the finishing nails & put two nails in each board 

(except the little chunks of wood, which only got one nail), one at each end.

You can hardly see those little nail heads!

Finishing nails are done. Now the final sanding with 220(?)-grit.

It's ready for stain!

4/13/12

First coat of stain down, now the waiting begins.

The first coat looks pretty good, right?

4/14/12

Second coat of stain down... more waiting...

 

4/15/12

Ok, so by this point, I knew this stain was going to be trouble.

Here's the things about Pittsburgh in April:

the weather is unpredictable & stain hates humidity.

 

Stain also hates little gnats that were seriously 

spawning or something because they were 

OUT OF CONTROL 

& the little jerks kept flying in my finish & dying there!

4/17/12

After the three coats of stain, there was too much build-up & I had no choice 
but to sand it down (to basically the first coat) & try again.

It looked good, but you never know until it dries...

AAAAAAAAAAnd it looked like hell. 

So try, try again...

 

I decided to try with this thing, a "Lambswool Stain Applicator." 

According to the package, everything would turn out great!

...NOT!!!!

I'd just like to say that this is the WORST product EVER!

DO NOT BUY THIS!

$$$$$$$

IT'S A TOTAL WASTE OF MONEY!

$$$$$$$$$$$$

IT COVERED EVERYTHING WITH LITTLE HAIRS!

  

I know you can't really see in the pictures, but just trust me. It was a MESS!

(Because of this project, I'm making a post of favorite products & one of worst products.

Guess in which post this applicator will be?!)

A LITTLE NOTE

 - & MAYBE A LITTLE ADVICE - 

CONCERNING SANDING:

Having to sand down & start over, oh I don't know... 

- maybe FIVE times -

may not sound like a big deal to those people who have never stained furniture before; 

but it takes a heck of a long time for stain to dry & 

you can't touch anything else on the project or risk screwing up the stain.

It's not like staining a deck or porch, it's tedious & has to be perfect because it's a piece of furniture that will be in your house; & it's going in my entryway, so every guest who enters my home will see it. 

I came across some excellent advice when I began sewing a few years ago, 

& it went something like this:

"When you are creating something, 

there is a BIG difference between 

handmade & homemade."

(Obviously, you want to your creations to look handmade.)

4/18/12

Getting the stain just right probably took me about a week, maybe a little less. Just when I was about to give up, paint & distress it instead, I figured out a WONDERFUL solution!

I took what was left of the PolyShades stain in the little can (which wasn't much...) & added some spoonfuls of Gel Stain (which seemed MUCH easier to apply) straight into the little can. I shook the bejeezus out of it (PUT THE LID BACK ON FIRST, FOR THE LOVE OF GOD!) & made a mixture of my own stain that was still a beautiful, dark color - 

but much, MUCH easier to apply.

I sanded down to the wood (in most places) - one... last... TIME...

& applied the first coat of my mixture.

Even though it was still wet, it already looked a thousand times better than all the other coats I had done. I was hopeful that maybe I wouldn't even have to do a second coat!

4/19/12

The next day I noticed one teensy-tiny problem I had overlooked...

See the handful of little rough spots? 

They're there because in those specific areas, I had removed all of the stain 

& sanded all the way down to the wood; BUT I did not condition the 

exposed wood so it didn't end up matching the rest of the finish. 

So I broke back out my extra fine sanding block & my conditioner. 

I sanded the rough areas, used a foam brush to add the conditioner, 

waited the 15-30 minutes, wiped the excess, let it dry & stained again.

 

Beautiful, right?!

Well, my son was up from his nap; 

so time to put the lid back on the stain & return to this another time.

OH NO! I DIDN'T COVER THE LID WITH A RAG OR PAPER TOWEL 

BEFORE I TAPPED THE LID BACK ON WITH MY MALLET! 

Needless to say

- as seems to more often that not be the case with me - 

I had taken one step forward & two steps back.

Well, let me introduce you to one of my favorite products!

GOOF OFF! 

YAY!

I figured I might as well touch-up the rest of the cabinet, as well.

See spot???

SEE SPOT RUN!!!

See those mistakes?

Voila! Much, much better!

It still needs touched up with paint, but I'll do that 

at the same time as the final glazing & polyurethane.

I moved the feet plates back because they were too far out. 

In the picture above, only four of the feet were moved in. 

The ones on the end of the right of the picture still needed moved.

Now in the pictures above & below they are all in their final resting places!

4/20/12

Now that the stain was done (HOORAY!), 

I took the knobs off to finish the top with a coat of hardening finishing wax 

(applied in tiny circles just like waxing a car - "wax on, wax off!"),

add the decorative wood trim moldings

(that's Gorilla brand wood glue mixed with construction adhesive again),

 

attach the finishing touches (like magnets to catch the cabinet doors & keep them shut),

& touch up all the ivory-colored paint & apply the glaze to the rest of the cabinet. 

(I did not glaze the stained wood top.)

I wiped & wiped the glaze (with professional painter's wiping cloths, duh), but I still thought it might be too dark. I'd have to let it dry & see it then to be sure.

Also, had you noticed that the right door sagged a little lower than the left? 

I knew that was going to need hiked up!

Finally, I thought that the large pieces of decorative trim were probably a little too much; 

but again I gave them a couple days to see if they would grow on me...

4/22/12

...Nope! They didn't;

so off they came.

 

The glaze was too dark, too.

I had to sand off the glue from removing the wood trim & repaint the sides; 

so while I had out my finishing sander & "Tiny Touch-It-Up Kit,"

I removed the handles (again) & got to work.

In the pictures below, the left side is sanded & the right is not. 

See how much brighter & clean it already looks?

I wanted to keep the glazed look, I just didn't want it that dark.

Now, both sides are sanded. The right side stripped down further than the left, 

but no big deal because it's all getting painted anyway.

Both sides painted...

4/23/12

 

- The Final Five Things -

1. Polyurethane the whole sucker,

2. Re-attach the knobs,

3. Polyurethane again,

4. Attach these self-leveling, heavy-duty felt pads to the bottom of the feet 

to protect my hardwood floors,

5. Carry it inside! (With my husband's help, of course...)

*******************

FINISHED PICTURES AS OF 

APRIL 24, 2012. 

I'M NOT DONE DECORATING THIS NOOK. 

*******************

 

The cabinet gave us lots of extra hidden storage for office, printer, & paper supplies

as well as reference books, media, & current reading.

I'm so glad I took my time with the reclaimed-wood top. 

It turned out so beautiful!

   

I'm so behind on all my posting because I just had to finish this project! 

I'll be sure to get caught up in the couple of weeks. 

There has been lots of stuff 'Rescued From The Curb!' & plenty of 'Goodwill Hunting!' 

You can look forward to about 10 new posts (at least!).

MORE PLANS ALREADY UNDERWAY

FOR THE ENTRY:

MIRRORS:

There will be a beautiful window pane mirror I painted & distressed (I will show in another post & link up here) to compliment the leaf mirror. I've seen a lot of layering of mirrors lately & I love the effect.

The leaf mirror in the picture has an antique glaze I whipped up by blending 

Martha Stewart paints with her special finishes.

LIGHTING:

 There are also two small lamps I'm working on because I THINK that this cabinet screams for a lamp on either side, but I'll have to see after I get them finished whether they will look better here or on the buffet I'm building for the dining room. 

That second lamp might be dangerous if it stays in this exact position in the entryway 

& be at risk of getting knocked over.

SHELVING:

I'm working on reclaimed-wood shelves, also from a wood pallet; 

but not as finished or stained. 

I'm going for a more rustic look with the because I want to blend my two favorite themes:

1. Traditional (yet comfortable & functional) 

2. Reclaimed/Vintage 

This will establish our style that carries throughout the entire house 

right from the very beginning.

REARRANGING:

...Enough said.

FINAL THOUGHTS:

For now, I just HAD to get the pictures up because I'm so proud of how great it turned out. 

I'll be sure to post updates as the entryway progresses.

CATCH THE BRAG POST HERE AT ANA-WHITE.COM!

I'm linked up to MISS MUSTARD SEED's 'Furniture Feature Friday!' 
Scroll down & "Like" number 194, "Faux Apothecary Cabinet." 
Help a fellow mom-trepreneur! 
(Silly me, I can't believe I haven't been linking up all my projects before this... but going to do that now. 
:) Yay, this is fun!)

"It was more than discovering something that I loved to do - 

It was discovering someone I had always been." 

 ~ Natalie ;-*